Tuning/Handling/Braking
2.0 Blacktop Into Mk3.5
Pleas go to Guides > TuningHandlingBraking > 2-0-Blacktop-Into-Mk3.5 > Introduction
2.0 TB > Fiesta Fit
Quick little guide for modifying a 2.0 silvertop throttle body to go onto any silvertop alloy cast inlet manifold. Start by removing the throttle linkage and bracket from your si TB Now onto the mondeo throttle body. Start by removing the TPS. Next remove the throttle cable and bracket. And finally the linkage Now for …
Powerflex Rear Bushes
Right so im putting a ZS axle on my mk3, thought may as well uprate the bushes so got some powerflex ones. My axle was off the car anyway but its pretty easy to remove it. I would think its possible to do it without removing it from the car but might be a bit …
Zetec Induction Pipe
CUSTOM SAMCO INDUCTION HOSE Thankyou to 95 Fiesta Si from fsi for this guide. Basically its made up of 3 parts, 2 samco hoses, a aluminum tube and 4 hose clips (2 each end of the tube, 1 on the throttle body and 1 and the maf) Total cost for this mod should be about …